Killflash / ARD for Weapon-Mounted Flashlights

Light cover available here - Material Type: The standard PLA+ version is great for most use cases. When heat resistance is essential, such as if your light head is immediately next to your silencer or muzzle device and you love mag dumping into trash, the PETG Carbon Fiber (PETG-CF) option would be better. - Precise Fit: Each light cover is sized specifically for each light model, within a few hundredths of an inch. This minimizes wiggling compared to Small/Medium/Large type generalized sizing. - Reduces Glare: The killflash reduces glare / reflections from the glass on the light head. Due to needing to print with the front of the killflash on the print bed, there may be some shine to it which can be minimized by sanding or spray painting it. - Rubber Band vs Tip Grip: Cover is held onto light head with included shock cord and rubber band, or shock cord and printed clamp called the Tip Grip. The Tip Grip removes the need to run the shock cord back to the light mount, instead everything is contained on the head itself for easy battery changes. Tip Grip Install Video Link Note: The Tip Grip now uses an M3 Allen Head, rather than Phillips. The Tip Grip is also compatible with other light covers if you have one from another brand. Do not overtorque the Tip Grip. Go until it doesn't slide forward, then do another quarter turn - only a couple inch-pounds. The ends do not need to touch. - Original Design: 2200+ products designed and 3D printed in the heart of America in St Louis, Missouri by Hammy3DPrints. The Tip Grip is available by itself here: https://hammy3dprints.com/products/tip-grip-flashlight-and-scope-clamp Lens covers for scopes are available here: https://hammy3dprints.com/products/lens-cover-for-scopes Covers available for:Viking, OWL, Rein 1.0, Rein 2.0, Rein 3.0, CWL-202, FL 11 / 14 / 17, WML Gen2, E1HT / E2HT, E2XT / E2XTL, OKW / PLHv2, Odin / Odin Mini, HLX / HLX Pro, Protac Rail Mount 1, Protac Rail Mount 2, Protac 2 Rail Mount, 951, 952V, KM3, TLR2, Vampire KM1-E / KM2-C, M300, M340, M600, M640, Turbo, X300, X300U, X300V, X300T, 7019M, WL25, and more! Disclaimer: I am not associated with any of the light manufacturers. These light covers are offered solely by Hammy3DPrints. MATERIAL: 3D printed using PLA+ filament. Note that this filament is not a high-temp filament rated for use inside vehicles left in direct sunlight during summer. If you require a higher-temp filament please order the PETG-CF option from the Color section. WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free. Made in USA. Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.